Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 180

Service access switch
Hide thumbs Also See for 7210 SAS E OS:
Table of Contents

Advertisement

QoS Commands
num-qos-classifiers
Syntax
num-qos-classifiers [num-resources]
Context
config>qos>sap-ingress>num-qos-classifiers
Description
This command configures the number of classifiers the SAP ingress Qos policy can use. This parame-
ter cannot be modified when it is associated with a SAP.
The num-resources parameter also determines the maximum number of meters that are available to
this policy. The maximum number of meters available for use by the forwarding classes (FC) defined
under this policy is equal to half the value specified in the parameter num-resources (maximum of
32). Any of these meters is available for use to police unicast or multipoint traffic. Any of these
meters is available for use by more than one FC (or a single meter is available for use by all the FCs).
Default
16
Parameters
num-resources — Specifies the number of resources planned for use by this policy
Page 180
5. forwarded-offered-that-turned-green
6. forwarded-offered-that-turned-yellow
When collect-stats is enabled, the counters are used by the system to generate the following
statistics:
a. offered-in
= 1 + 2
b. offered-out
= 0
c. discard-in
= 3
d. discard-out
= 4
e. forward-in
= 5
f. forward-out
= 6
Counter 0 indicates that the accounting statistic returns a value of zero.
With offered-total-cir enabled as the policer stat-mode, the SAP offered stats for the policer
returned via MIB query and CLI show commands will return the following values:
i. offered-high
= 1 + 2
ii. offered-low
= 0
iii. offered-undefined
= 0
iv. offered-managed
= 0 (IMPM managed packets are not redirected from the policer)
Counter 0 indicates that the SAP policer statistic returns a value of zero.
Values
16, 32, 72
= Derived from 1 - 3
= Derived from 2 - 4
7210 SAS-E OS Quality of Service Guide

Advertisement

Table of Contents
loading

Table of Contents