Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 255

Show Commands
slope-policy
Syntax slope-policy [slope-policy-name] [detail]
Context show>qos
Description This command displays slope policy information.
Parameters slope-policy-name — The name of the slope policy.
detail — Displays detailed information about the slope policy.
Output Slope QoS Policy Output Fields — The following table describes slope QoS policy output
fields.
Sample Output
*A:>config# show qos slope-policy 1
===============================================================================
QoS Slope Policy
===============================================================================
Policy
-------------------------------------------------------------------------------
Utilization
-------------------------------------------------------------------------------
High-Slope
Low-Slope
-------------------------------------------------------------------------------
Queue
-------------------------------------------------------------------------------
Queue 1
Queue 2
Queue 3
Queue 4
Queue 5
Queue 6
Queue 7
Queue 8
===============================================================================
*A:>config#
*A:>config# show qos slope-policy 1 detail
===============================================================================
QoS Slope Policy
===============================================================================
Policy
-------------------------------------------------------------------------------
Utilization
-------------------------------------------------------------------------------
7210 SAS-E OS Quality of Service Guide
: 1
State
Down
Down
High Slope Drop Rate(%)
6.250000
6.250000
6.250000
6.250000
6.250000
6.250000
6.250000
6.250000
: 1
State
Start-Threshold
75%
50%
Low Slope Drop Rate(%)
100.000000
100.000000
100.000000
100.000000
100.000000
100.000000
100.000000
100.000000
Start-Threshold
QoS Commands
Page 255