Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 186

QoS Commands
IP QoS Policy Match Commands
dscp
Syntax dscp
no dscp
Context config>qos>sap-ingress>ip-criteria>entry>match
Description This command configures a DiffServ Code Point (DSCP) code point to be used for classification of
packets from the specified FC.
The no form of this command removes the DSCP match criterion.
Default
none
Parameters
dscp-name — Specifies a dscp name that has been previously mapped to a value using the dscp-name
Page 186
command. The DiffServ code point can only be specified by its name.
Values
be, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cs1, cp9, af11, cp11, af12, cp13, af13, cp15,
cs2, cp17, af21, cp19, af22, cp21, af23, cp23, cs3, cp25, af31, cp27, af32, cp29,
af33, cp31, cs4, cp33, af41, c p35, af42, cp37, af43, cp39, cs5, cp41, cp42, cp43,
cp44, cp45, ef, cp47, nc1, cp49, cp50, cp51, cp52, cp53, cp54, cp55, nc2, cp57,
cp58, cp59, cp60, cp61, cp62, cp63
7210 SAS-E OS Quality of Service Guide