Overview - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Overview

Overview
Default buffer pool exists (logically) at each port. Each physical port has two associated pool
objects:
•
•
By default, each pool is associated with slope-policy default which disables the high-slope and
low-slope parameters within the pool.
For information about the tasks and commands necessary to access the command line interface
and to configure and maintain your 7210 SAS E, refer to CLI Usage chapter in the 7210 SAS E OS
Basic System Configuration Guide.
Page 238
Access egress pool
Access uplink egress pool
7210 SAS-E OS Quality of Service Guide