Modifying Access Egress Qos Queues - Alcatel-Lucent 7210 SAS M OS Quality Of Service Manual

Modifying Access Egress QoS Queues

To modify access egress queue parameters specify the following:
•
•
The following displays the access egress QoS policy configuration:
Sample configuration with remarking set to "use-dscp":
*A:7210-SAS-M>config>qos>access-egress# info
----------------------------------------------
----------------------------------------------
*A:7210-SAS-M>config>qos>access-egress#
Sample configuration with remarking set to "all":
*A:7210-SAS-M>config>qos>access-egress# info
----------------------------------------------
7210 SAS M OS Quality of Service Guide
Queue ID value. 8 Queues are identified and are mapped as defined in
Forwarding Class to Queue-ID Map, on page
Queue parameters. Egress queues support configuration of CIR and PIR rates.
description "policy-1"
remarking use-dscp
queue 1
exit
queue 2
exit
queue 3
exit
queue 4
exit
queue 5
adaptation-rule cir max pir min
rate cir 10000 pir 11690
exit
queue 6
exit
queue 7
exit
queue 8
exit
fc be create
exit
description "policy-2"
remarking all
scope exclusive
queue 1
exit
queue 2
exit
queue 3
exit
Access Egress QoS Policies
82.
Table 32,
Page 341