Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 126

QoS Commands
Operational Commands
copy
Syntax copy network-queue src-name dst-name [overwrite]
Context config>qos
Description
This command copies or overwrites existing network queue QoS policies to another network queue
policy ID.
The copy command is a configuration level maintenance tool used to create new policies using exist-
ing policies. It also allows bulk modifications to an existing policy with the use of the overwrite key-
word.
Parameters
network-queue — Indicates that the source policy ID and the destination policy ID are network-
overwrite — specifies to replace the existing destination policy. Everything in the existing
Page 126
queue policy IDs. Specify the source policy ID that the copy command will attempt to copy from
and specify the destination policy ID to which the command will copy a duplicate of the policy.
destination policy will be overwritten with the contents of the source policy. If overwrite is not
specified, a message is generated saying that the destination policy ID exists.
SR>config>qos# copy network-queue nq1 nq2
MINOR: CLI Destination "nq2" exists - use {overwrite}.
SR>config>qos# copy network-queue nq1 nq2 overwrite
7210 SAS-E OS Quality of Service Guide