Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 218

QoS Commands
Show Commands
access-egress
Syntax access-egress [policy-id] [association | detail]
Context show>qos
Description
This command displays Access egress QoS policy information.
Parameters policy-id — Displays information about the specific policy ID. Displays all access-egress policies if
association — Displays a list of ports on which the policy is applied.
detail — Displays detailed policy information including policy associations.
Access Egress Output — The following table describes Access egress show command output.
Page 218
no specific policy-id is entered.
Values 1 — 65535
Label
Policy-Id
Remark
Scope
Description
Forward Class/FC
Name
Explicit/Default
The ID that uniquely identifies the policy.
True — Remarking is enabled for all the Dot1q-tagged packets that
egress the ports where the access-egress QoS policy is applied and
remarking is enabled.
The remarking is based on the forwarding class to explicit Dot1P bit
mapping defined under the fc name. If explicit mapping FC-Dot1P
map not defined marking is based on the default FC-Dot1P marking
map as defined in Table 12, Default Access Egress Policy ID 1 Defini-
tion, on page 42.
False — Remarking is disabled for the policy.
Exclusive — Implies that this policy can only be applied to a single
access egress port.
Template — Implies that this policy can be applied to multiple access
ports on the router.
A text string that helps identify the policy's context in the configura-
tion file
Specifies the forwarding class to Dot1p remarking value.
Explicit — Specifies the egress IEEE 802.1P (dot1p) bits marking for
fc-name if explicitly configured.
Default —Specifies the default dot1p value according to FC-Dot1p
marking map as defined in
1 Definition, on page 42 if explicit values are not configured..
7210 SAS-E OS Quality of Service Guide
Description
Table 12, Default Access Egress Policy ID