Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 194

QoS Commands
Show Commands
sap-ingress
Syntax sap-ingress [policy-id] [detail]
Context show>qos
Description
This command displays SAP ingress QoS policy information.
Parameters policy-id — Displays information about the specific policy ID.
detail — Displays detailed policy information including policy associations.
Sample Output
Show SAP Ingress Output — The following table describes SAP ingress show command output.
Page 194
Default
all SAP ingress policies
Values
1 — 65535
Label
Policy-Id
Scope
Description
Default FC
Criteria-type
Meter
Mode
CIR Admin
The ID that uniquely identifies the policy.
Exclusive — Implies that this policy can only be applied to a sin-
gle SAP.
Template — Implies that this policy can be applied to multiple
SAPs on the router.
A text string that helps identify the policy's context in the configura-
tion file.
Specifies the default forwarding class for the policy.
IP — Specifies that an IP criteria-based SAP ingress policy is used to
select the appropriate ingress meter and corresponding forwarding
class for matched traffic.
MAC — Specifies that a MAC criteria-based SAP is used to select the
appropriate ingress meter and corresponding forwarding class for
matched traffic.
Displays the meter ID.
Specifies the configured mode of the meter (trTcm or srTcm).
Specifies the administrative Committed Information Rate (CIR)
parameters for the meter.
7210 SAS-E OS Quality of Service Guide
Description