QoS Commands
traffic out of the port is in the ratio of 1:5 between the queues (1 and 2) provided no traffic is flowing
in the other queues. If the keyword strict is specified in any of the queues, then that particular queue
will be treated as strict. This set of strict priority queues is serviced first in the order of their CoS
numbering (the higher numbered CoS queue receives service before smaller numbered queues).
The no form of the queue under a WRR/WDRR mode will set the queue weights to default (for
example, 1).
Parameters
queue-id — Specifies the queue ID.
strict — Specifies strict access.
weight weight — Specifies the number of packets in case of WRR and ratio of traffic out in WDRR.
Page 234
Values
1 — 8 (8 is the highest)
Values
1 — 5
7210 SAS-E OS Quality of Service Guide