Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 173

The no form of the command removes all the explicit queue mappings for fc-name forwarding types.
The queue mappings revert to the default meters for fc-name.
Parameters
fc-name — Specifies the forwarding class name for the queue. The value given for the fc-name must
ip-criteria
Syntax [no] ip-criteria
Context config>qos>sap-ingress
Description
IP criteria-based SAP ingress policies are used to select the appropriate ingress meter and correspond-
ing forwarding class for matched traffic.
This command is used to enter the context to create or edit policy entries that specify IP criteria Diff-
Serv code point.
7210 SAS OS implementation will exit on the first match found and execute the actions in accordance
with the accompanying action command. For this reason entries must be sequenced correctly from
most to least explicit.
The no form of this command deletes all the entries specified under this node. Once IP criteria entries
are removed from a SAP ingress policy, the IP criteria is removed from all services where that policy
is applied.
mac-criteria
Syntax [no] mac-criteria
Context config>qos>sap-ingress
Description
The mac-criteria based SAP ingress policies are used to select the appropriate ingress meter and cor-
responding forwarding class for matched traffic.
This command is used to enter the node to create or edit policy entries that specify MAC criteria.
7210 SAS OS implementation will exit on the first match found and execute the actions in accordance
with the accompanying action command. For this reason entries must be sequenced correctly from
most to least explicit.
The no form of this command deletes all the entries specified under this node. Once mac-criteria
entries are removed from a SAP ingress policy, the mac-criteria is removed from all services where
that policy is applied.
no-stats — Counter resource allocation:0
7210 SAS-E OS Quality of Service Guide
be one of the predefined forwarding classes for the system.
Values
fc:
Default
None (Each class-name must be explicitly defined)
Default
class
class: be, l2, af, l1, h2, ef, h1, nc
QoS Commands
Page 173