Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 252

Slope QoS Commands
Slope Policy QoS Policy Commands
high-slope
Syntax [no] high-slope
Context config>qos>slope-policy
Description The high-slope context contains the commands and parameters for defining the high priority Random
Early Detection (RED) slope graph. Each buffer pool supports a high priority RED slope for manag-
ing access to the shared portion of the buffer pool for high priority or in-profile packets.
The high-slope parameters can be changed at any time and the affected buffer pool high priority RED
slopes will be adjusted appropriately.
The no form of this command restores the high slope configuration commands to the default values.
If the commands within high-slope are set to the default parameters, the high-slope node will not
appear in save config and show config output unless the detail parameter is present.
low-slope
Syntax [no] low-slope
Context config>qos>slope-policy
Description The low-slope context contains the commands and parameters for defining the low priority Random
Early Detection (RED) slope graph. Each buffer pool supports a low priority RED slope for managing
access to the shared portion of the buffer pool for low priority or out-of-profile packets.
The low-slope parameters can be changed at any time and the affected buffer pool low priority RED
slopes must be adjusted appropriately.
The no form of this command restores the low slope configuration commands to the default values. If
the leaf commands within low-slope are set to the default parameters, the low-slope node will not
appear in save config and show config output unless the detail parameter is present.
Page 252 7210 SAS-E OS Quality of Service Guide