Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 94

QoS Commands
Operational Commands
copy
Syntax copy network src-pol dst-pol [overwrite]
Context config>qos
Description
This command copies existing QoS policy entries for a QoS policy-id to another QoS policy-id.
The copy command is used to create new policies using existing policies and also allows bulk modifi-
cations to an existing policy with the use of the overwrite keyword.
Parameters network src-pol dst-pol — Indicates that the source and destination policies are network policy IDs.
overwrite — Specifies to replace the existing destination policy. Everything in the existing
scope
Syntax scope {exclusive | template}
no scope
Context config>qos>network policy-id
Description This command configures the network policy scope as exclusive or template.
The no form of this command sets the scope of the policy to the default of template.
Default template
Parameters
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to one
template — When the scope of a policy is defined as template, the policy can be applied to multiple
Page 94
Specify the source policy that the copy command will copy and specify the destination policy to
which the command will duplicate the policy to a new or different policy ID.
Values 1 — 65535
destination policy will be overwritten with the contents of the source policy. If overwrite is not
specified, an error will occur if the destination policy ID exists.
SR>config>qos# copy network 1 427
MINOR: CLI Destination "427" exists use {overwrite}.
SR>config>qos# copy network 1 427 overwrite
interface. If a policy with an exclusive scope is assigned to a second interface an error message is
generated. If the policy is removed from the exclusive interface, it will become available for
assignment to another exclusive interface.
The system default policies cannot be put into the exclusive scope. An error will be generated if
scope exclusive is executed in any policies with a policy-id equal to 1.
interfaces on the router.
Default QoS policies are configured with template scopes. An error is generated if you try to
modify the template scope parameter to exclusive scope on default policies.
7210 SAS-E OS Quality of Service Guide