Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 104

QoS Commands
Network Egress QoS Policy Commands
egress
Syntax egress
Context config>qos>network policy-id
Description
This command is used to enter the CLI node that creates or edits egress policy entries that specify the
forwarding class Dot1p marking map to be instantiated when this policy is applied to the network
port.
The forwarding class and profile state mapping to Dot1p bits mapping for all packets are defined in
this context.
All out-of-profile service packets are marked with the corresponding out-of-profile Dot1p bit value at
network egress. All the in-profile service ingress packets are marked with the corresponding in-pro-
file Dot1p bit value based on the forwarding class they belong.
fc
Syntax [no] fc fc-name
Context config>qos>network>egress
Description This command specifies the forwarding class name. The forwarding class name represents an egress
queue. The fc fc-name represents a CLI parent node that contains sub-commands or parameters
describing the egress characteristics of the queue and the marking criteria of packets flowing through
it. The fc command overrides the default parameters for that forwarding class to the values defined in
the network default policy.
The no form of this command removes the forwarding class Dot1p map associated with this queue, as
appropriate. The forwarding class reverts to the defined parameters in the default network policy. If
the fc-name is removed from the network policy that forwarding class reverts to the factory defaults.
Default
Undefined forwarding classes default to the configured parameters in the default network policy pol-
icy-id 1.
Parameters
fc-name — The case-sensitive, system-defined forwarding class name for which policy entries will
Page 104
be created.
Default
none
Values
be, l2, af, l1, h2, ef, h1, nc
7210 SAS-E OS Quality of Service Guide