Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 83

CLI Syntax: config>qos#
Network Egress Parameters
Network Ingress Parameters
config>qos>network# info
----------------------------------------------
----------------------------------------------
A:ALA-10config>qos>network#
CLI Syntax:
The following output displays the configuration for uplink port 1/1/1 with network policy 600
applied to the interface.
A:ALA-7>config# info
#--------------------------------------------------
echo "Port Configuration"
7210 SAS-E OS Quality of Service Guide
network policy-id [network-policy-type network-policy-type]
description description-string
scope {exclusive|template}
egress
remarking
fc {be|l2|af|l1|h2|ef|h1|nc}
dot1p-in-profile dot1p-priority
dot1p-out-profile dot1p-priority
ingress
default-action fc {fc-name} profile {in|out}
dot1p dot1p-priority fc {fc-name} profile {in|out}
fc {fc-name}
meter {meter-id}
multicast-meter {id}
meter meter-id [multipoint]
adaptation-rule cir {closest | max | min} pir {clos-
est | max | min}
cbs {size-in-kbits}
mbs {size-in-kbits}
mode {trtcm | srtcm}
rate cir cir-rate-in-kbps [pir pir-rate-in-kbps]
description "Network Qos policy 200"
ingress
meter 1 create
exit
meter 9 multipoint create
exit
exit
egress
remarking
exit
access uplink ports
config>port
ethernet
access
uplink
qos network-policy-id
Network QoS Policies
Page 83