Default Access Egress Qos Policy Values - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Overview

Default Access Egress QoS Policy Values

The default access egress policy is identified as policy-id 1. The default policy cannot be edited or
deleted. The following displays default policy parameters:
*A:card-1>config>qos>access-egress# info detail
----------------------------------------------
----------------------------------------------
*A:card-1>config>qos>access-egress#
Page 204
description "Default Access egress QoS policy."
remarking
scope template
queue 1
adaptation-rule cir closest pir closest
rate cir 0 pir max
exit
queue 2
adaptation-rule cir closest pir closest
rate cir 0 pir max
exit
queue 3
adaptation-rule cir closest pir closest
rate 0 pir max
exit
queue 4
adaptation-rule cir closest pir closest
rate cir 0 pir max
exit
queue 5
adaptation-rule cir closest pir closest
rate cir 0 pir max
exit
queue 6
adaptation-rule cir closest pir closest
rate cir 0 pir max
exit
queue 7
adaptation-rule cir closest pir closest
rate cir 0 pir max
exit
queue 8
adaptation-rule cir closest pir closest
rate cir 0 pir max
exit
7210 SAS-E OS Quality of Service Guide