Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 181

Service Ingress QoS Policy Forwarding Class Commands
broadcast-meter
Syntax broadcast-meter meter-id
no broadcast-meter
Context config>qos>sap-ingress>fc
Description This command overrides the default broadcast forwarding type meter mapping for fc fc-name. The
specified meter-id must exist within the policy as a multipoint meter before the mapping can be made.
Once the forwarding class mapping is executed, all broadcast traffic on a SAP using this policy will
be forwarded using the meter-id.
The broadcast forwarding type usually tracks the multicast forwarding type definition. This command
overrides that default behavior.
The no form of the command sets the broadcast forwarding type meter-id back to the default of track-
ing the multicast forwarding type meter mapping.
Parameters meter-id — Specifies an existing multipoint queue defined in the config>qos>sap-ingress context.
meter
Syntax meter meter-id
no meter
Context config>qos>sap-ingress>fc
Description
This command overrides the default unicast forwarding type meter mapping for fc fc-name. The spec-
ified meter-id must exist within the policy as a non-multipoint meter before the mapping can be made.
Once the forwarding class mapping is executed, all unicast traffic (this includes all traffic, even broad-
cast and multicast for services) on a SAP using this policy is forwarded using the meter-id.
The no form of this command sets the unicast (point-to-point) meter-id back to the default meter for
the forwarding class (meter 1).
Parameters
meter-id — Specifies an existing non-multipoint meter defined in the config>qos>sap-ingress
7210 SAS-E OS Quality of Service Guide
Values 1 to 32
Default
11
context.
Values
1 — 32
QoS Commands
Page 181