Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 34

QoS Overview
Peak Information Rate
The peak information rate (PIR) defines the maximum rate at which packets are allowed to exit the
queue. It does not specify the maximum rate at which packets may enter the queue; this is
governed by the queue's ability to absorb bursts. The actual transmission rate of a egress queue
depends on more than just its PIR. Each queue is competing for transmission bandwidth with other
queues. Each queue's PIR, CIR and the relative priority or weight of the scheduler serving the
queue, all combine to affect a queue's ability to transmit packets.
The PIR is provisioned on egress service queues within access egress QoS policies.
The PIR for access uplink queues are defined within network queue policies based on the
forwarding class. The PIR for the access uplink queues is specified as a percentage of the network
interface bandwidth.
When defining the PIR for a queue or meter, the value specified is the administrative PIR for the
queue. The user has some control over how the administrative PIR is converted to an operational
PIR should the hardware not support the exact CIR and PIR values specified. The interpretation of
the administrative PIR is discussed below in
Page 34
Adaptation Rule for Queues on page 35
7210 SAS E OS Quality of Service Guide