Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 201

•
•
The following displays the access egress QoS policy configuration:
A:card-1>config>qos# info
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
....
...
----------------------------------------------
A:card-1>config>qos#
7210 SAS-E OS Quality of Service Guide
Remark - By default, . The Dot1p values in the customer packets which are egressing on
this access port are marked according to the FC-Dot1p marking map
Access Egress Policy ID 1 Definition, on page
If the user wants to change the FC-Dot1p marking map, the forwarding class and the
Dot1p marking values for the in-profile and out-profile packets must be specified.
access-egress 30 create
remarking
queue 1
rate cir 100 pir 4500
exit
queue 2
exit
queue 3
exit
queue 4
exit
queue 5
exit
queue 6
exit
queue 7
exit
queue 8
exit
exit
Access Egress QoS Policies
Table 12, Default
42.
Page 201