Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 183

Service Ingress QoS Policy Entry Commands
action
Syntax action [fc fc-name]
no action
Context config>qos>sap-ingress>ip-criteria>entry
config>qos>sap-ingress>mac-criteria>entry
Description
This mandatory command associates the forwarding class with specific IP or MAC criteria entry ID.
The action command supports setting the forwarding class parameter. Packets that meet all match cri-
teria within the entry have their forwarding class overridden based on the parameters included in the
action parameters.
The action command must be executed for the match criteria to be added to the active list of entries.
Each time action is executed on a specific entry ID, the previous entered values for fc fc-name is over-
ridden with the newly defined parameters.
The no form of the command removes the entry from the active entry list. Removing an entry on a
policy immediately removes the entry from all SAPs using the policy. All previous parameters for the
action is lost.
Default
Action specified by the default-fc.
Parameters
fc fc-name — The value given for fc fc-name must be one of the predefined forwarding classes in the
entry
Syntax [no] entry entry-id [create]
Context config>qos>sap-ingress>ip-criteria
config>qos>sap-ingress>mac-criteria
Description This command is used to create or edit an IP or MAC criteria entry for the policy. Multiple entries can
be created using unique entry-id numbers.
The list of flow criteria is evaluated in a top down fashion with the lowest entry ID at the top and the
highest entry ID at the bottom. If the defined match criteria for an entry within the list matches the
information in the egress packet, the system stops matching the packet against the list and performs
the matching entries reclassification actions. If none of the entries match the packet, the IP flow
reclassification list has no effect on the packet.
An entry is not populated in the list unless the action command is executed for the entry. An entry that
is not populated in the list has no effect on egress packets. If the action command is executed without
7210 SAS-E OS Quality of Service Guide
system. Specifying the fc fc-name is required. When a packet matches the rule, the forwarding
class is only overridden when the fc fc-name parameter is defined on the rule. If the packet
matches and the forwarding class is not explicitly defined in the rule, the forwarding class is
inherited based on previous rule matches.
QoS Commands
Page 183