Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 170

QoS Commands
Operational Commands
copy
Syntax copy sap-ingress src-pol dst-pol [overwrite]
Context config>qos
Description
This command copies existing QoS policy entries for a QoS policy-id to another QoS policy-id.
The copy command is a configuration level maintenance tool used to create new policies using exist-
ing policies. It also allows bulk modifications to an existing policy with the use of the overwrite key-
word.
Parameters
sap-ingress src-pol dst-pol — Indicates that the source policy ID and the destination policy ID are
overwrite — Specifies to replace the existing destination policy. Everything in the existing
renum
Syntax renum old-entry-number new-entry-number
Context config>qos>sap-ingress>ip-criteria
config>qos>sap-ingress>mac-criteria
Description
This command renumbers existing QoS policy criteria entries to properly sequence policy entries.
This can be required in some cases since the 7210 SAS exits when the first match is found and exe-
cutes the actions in accordance with the accompanying action command. This requires that entries be
sequenced correctly from most to least explicit.
Parameters old-entry-number — Enter the entry number of an existing entry.
new-entry-number — Enter the new entry-number to be assigned to the old entry.
Page 170
SAP ingress policy IDs. Specify the source policy ID that the copy command will attempt to copy
from and specify the destination policy ID to which the command will copy a duplicate of the
policy.
Values
1 — 65535
destination policy will be overwritten with the contents of the source policy. If overwrite is not
specified, an error will occur if the destination policy ID exists.
Default
none
Values
1 — 64
Default none
Values
1 — 64
7210 SAS-E OS Quality of Service Guide