Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 217

scope
Syntax scope {exclusive | template}
no scope
Context config>qos>access-egress
Description This command configures the scope as exclusive or template. The policy's scope cannot be changed if
the policy is applied to multiple ports.
The no form of this command sets the scope of the policy to the default of template.
Default
template
Parameters
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to one
template — When the scope of a policy is defined as template, the policy can be applied to multiple
7210 SAS-E OS Quality of Service Guide
port. If a policy with an exclusive scope is assigned to a second interface an error message is
generated. If the policy is removed from the exclusive interface, it will become available for
assignment to another exclusive interface.
The system default policies cannot be put into the exclusive scope. An error will be generated if
scope exclusive is executed in default access-egress policy (policy-id 1).
ports on the router.
Default QoS policies are configured with template scope. An error is generated if you try to
modify the scope parameter from template to exclusive scope on default policies.
QoS Commands
Page 217