Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 150

Basic Configurations
In the example above, assuming the policy is attached to a SAP in a VPLS service, classification
entries used per FC are as follows:
FCnc = 0 + 0 + 0 + 0 = 0
FCh1 = 0 + 0 + 0 + 0 = 0
FCef = 0 + 0 + 0 + 0 = 0
FCh2 = 1 + 1 + 1 + 0 = 3
Since this FC uses unicast meter and broadcast meter, two entries are required to identify these
traffic types explicitly. Another entry is required to classify multicast and unknown-unicast traffic
type to the same FC and use the default meter #11.
FCl1 = 1 + 1 + 1 + 0 = 3
FCaf = 1 + 1 + 1 + 0 = 3
FCl2 = 0 + 0 + 0 + 0 = 0
FCbe = 1 + 1 + 1 + 0 = 2
Page 150
meter 11 multipoint create
exit
fc "af" create
meter 3
broadcast-meter 2
exit
fc "be" create
meter 3
broadcast-meter 2
exit
fc "h2" create
meter 3
broadcast-meter 2
exit
fc "l1" create
meter 3
broadcast-meter 2
exit
mac-criteria
entry 1 create
match
dot1p 7 7
exit
action fc "af"
exit
entry 2 create
match
dot1p 5 7
exit
action fc "l1"
exit
entry 3 create
match
dot1p 6 7
exit
action fc "h2"
exit
exit
default-fc "be"
7210 SAS-E OS Quality of Service Guide