Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 130

QoS Commands
pir percent — Defines the percentage of the maximum rate allowed for the queue. When the rate
Page 130
The actual CIR rate is dependent on the queue's adaptation-rule parameters and the actual
hardware where the queue is provisioned.
Values 0 — 100
Default
01000
command is executed, the PIR setting is optional. When the rate command has not been
executed, or the PIR parameter is not explicitly specified, the default PIR of 100 is assumed.
Fractional values are not allowed and must be given as a positive integer.
Values
1— 100 percent
Default
100
7210 SAS-E OS Quality of Service Guide