Default Slope Policy Values; Table 25: Slope Policy Defaults - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Overview

Default Slope Policy Values

The default access egress and access uplink egress policies are identified as policy-id "default".
The default policies cannot be edited or deleted. The following table displays default policy
parameters:

Table 25: Slope Policy Defaults

description
high (RED) slope
Administrative state
start-threshold
queue 1 — 8 drop-rate
low (RED) slope
Administrative state
start-threshold
queue 1 — 8 drop-rate
The following output displays the default configuration:
ALA7>config>qos>slope-policy# info detail
----------------------------------------------
Page 242
Field
description "Default slope policy."
high-slope
shutdown
start-threshold 75
queue 1 drop-rate 1
queue 2 drop-rate 1
queue 3 drop-rate 1
queue 4 drop-rate 1
queue 5 drop-rate 1
queue 6 drop-rate 1
queue 7 drop-rate 1
queue 8 drop-rate 1
exit
low-slope
shutdown
start-threshold 50
queue 1 drop-rate 0
queue 2 drop-rate 0
queue 3 drop-rate 0
queue 4 drop-rate 0
queue 5 drop-rate 0
queue 6 drop-rate 0
queue 7 drop-rate 0
queue 8 drop-rate 0
exit
Default
Default slope policy
shutdown
75% utilization
1 (6.25% drop rate)
shutdown
50% utilization
0 (100% drop rate)
7210 SAS-E OS Quality of Service Guide