Deleting Qos Policies; Remove A Policy From The Qos Configuration - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Overview

Deleting QoS Policies

A slope policy is associated by default with access and access uplink egress pools. A default
policy may be replaced with a non-default policy, but a policy cannot be entirely removed from the
configuration. When a non-default policy is removed, the policy association reverts to the default
slope policy policy-id default. A QoS policy cannot be deleted until it is removed from all ports
where it is applied.
ALA-7>config>qos# no slope-policy slopePolicy1
MINOR: QOS #1902 Slope policy has references
ALA-7>config>qos#
Ports
The following CLI syntax examples can be used to remove slope policies from MDA ports:
CLI Syntax: config>port>access>egress>pool# no slope-policy name

Remove a Policy from the QoS Configuration

To delete a slope policy, enter the following command:
CLI Syntax: config>qos# no slope-policy policy-id
Example
Page 244
config>port>accesss>uplink>egress>pool# no slope-policy name
:
config>qos# no slope-policy slopePolicy1
7210 SAS-E OS Quality of Service Guide