Copying And Overwriting Qos Policies - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Service Management Tasks

Copying and Overwriting QoS Policies

You can copy an existing service ingress policy, rename it with a new policy ID value, or
overwrite an existing policy ID. The
the destination policy ID exists.
CLI Syntax: config>qos# copy {sap-ingress } source-policy-id dest-policy-
id [overwrite]
*A:ALU-7210>config>qos# info
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
----------------------------------------------
*A:ALU-7210>config>qos#
Page 162
sap-ingress 100 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
sap-ingress 101 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
sap-ingress 200 create
description "Used on VPN sap"
meter 1 create
exit
meter 2 multipoint create
exit
meter 10 create
rate cir 11000
exit
meter 11 multipoint create
exit
exit
option must be specified or an error occurs if
overwrite
7210 SAS-E OS Quality of Service Guide