Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 184

QoS Commands
any explicit reclassification actions specified, the entry is populated in the list allowing packets
matching the entry to exit the list, preventing them from matching entries lower in the list. Since this
is the only flow reclassification entry that the packet matched and this entry explicitly states that no
reclassification action is to be performed, the matching packet will not be reclassified.
The no form of this command removes the specified entry from the policy. Entries removed from the
policy are immediately removed from all services where that policy is applied.
Default none
Parameters entry-id — The entry-id, expressed as an integer, uniquely identifies a match criterion and the
create — Required parameter when creating a flow entry when the system is configured to require
match
Syntax [no] match
Context config>qos>sap-ingress>ip-criteria>entry
Description This command creates a context to configure match criteria for SAP QoS policy match criteria. When
the match criteria have been satisfied the action associated with the match criteria is executed.
Only a single match criteria (either MAC or IP) is allowed at any point of time.
match
Syntax match
no match
Context config>qos>sap-ingress>mac-criteria>entry
Description This command creates a context for entering/editing match MAC criteria for ingress SAP QoS policy
match criteria. When the match criteria have been satisfied the action associated with the match crite-
ria is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match will be executed.
Page 184
corresponding action. It is recommended that multiple entries be given entry-ids in staggered
increments. This allows users to insert a new entry in an existing policy without requiring
renumbering of all the existing entries.
An entry cannot have any match criteria defined (in which case, everything matches) but must
have at least the keyword action fc fc-name for it to be considered complete. Entries without the
action keyword will be considered incomplete and hence will be rendered inactive.
Default
none
Values
1— 64
the explicit use of the keyword to prevent accidental object creation. Objects may be accidentally
created when this protection is disabled and an object name is mistyped when attempting to edit
the object. This keyword is not required when the protection is disabled. The keyword is ignored
when the flow entry already exists.
7210 SAS-E OS Quality of Service Guide