Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 107

Table 21: Show QoS Network Output Fields (Continued)
A:ALA-12# show qos network
==============================================================================
Network Policies
==============================================================================
Policy-Id
------------------------------------------------------------------------------
1
==============================================================================
A:ALA-12#
*A:SN12345678# show qos network 1
===============================================================================
QoS Network Policy
===============================================================================
-------------------------------------------------------------------------------
Network Policy (1)
-------------------------------------------------------------------------------
Policy-id
Forward Class
Attach Mode
Scope
Description
-------------------------------------------------------------------------------
Meter Mode
-------------------------------------------------------------------------------
1
9
-------------------------------------------------------------------------------
FC
-------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
Port Attachments
-------------------------------------------------------------------------------
Port-id : 1/1/24
===============================================================================
*A:SN12345678#
*A:dut-g# show qos network 1 detail
===============================================================================
QoS Network Policy
===============================================================================
-------------------------------------------------------------------------------
Network Policy (1)
-------------------------------------------------------------------------------
7210 SAS-E OS Quality of Service Guide
Label
Dot1p Bit Mapping:
Out-of-Profile
In-Profile
Port-Id
Remark
True Default network QoS policy.
: 1
: be
: l2
: Template
: Default network QoS policy.
CIR Admin
TrTcm_CA 0
TrTcm_CA 0
UCastM
Displays the Dot1p value used for out-of-profile traffic.
Displays the Dot1p value used for in-profile traffic.
Specifies the physical port identifier that associates the interface.
Description
CIR Rule PIR Admin
closest max
closest max
MCastM
QoS Commands
Description
Remark : True
Profile : Out
Config Mode : l2
PIR Rule CBS
closest 32
closest 32
MBS
128
128
Page 107