Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 131

Show Commands
network-queue
Syntax network-queue [network-queue-policy-name] [detail]
Description
This command displays network queue policy information.
Context show>qos
Parameters network-queue-policy-name — The name of the network queue policy.
detail — Includes each queue's rates and adaptation-rule and & cbs details. It also shows FC to queue
*A:card-1# show qos network-queue nq1
===============================================================================
QoS Network Queue Policy
-------------------------------------------------------------------------------
Network Queue Policy (nq1)
-------------------------------------------------------------------------------
Policy
Accounting
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
Port-id : 1/1/20
7210 SAS-E OS Quality of Service Guide
Values
Valid names consist of any string up to 32 characters long composed of printable, 7-
bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the
entire string must be enclosed within double quotes.
mapping details.
Label
Policy
Accounting
Description
Port-Id
Queue
CIR
PIR
CBS
FC
: nq1
: packet-based
The policy name that uniquely identifies the policy.
Displays whether the accounting mode is packet-based or frame-based.
A text string that helps identify the policy's context in the configuration
file.
Displays the physical port identifier where the network queue policy is
applied.
Displays the queue ID.
Displays the committed information rate.
Displays the peak information rate.
Displays the committed burst size.
Displays FC to queue mapping.
QoS Commands
Description
Page 131