Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 105

Network Egress QoS Policy Forwarding Class Commands
remarking
Syntax remarking
Context config>qos>network policy-id>egress
Description
Remarking is always enabled on the access uplink ports. Since the 7210 SAS E will be used to con-
nect to a particular diffserv domain so it is very important that each and every packet ingressing on
the 7210 SAS E is mapped and marked and thereby assigned to a particular diffserv class while going
through the network. The downstream node, a 7x50 router, will be assigning the FC based on the
Dot1P assigned in 7210 SAS E.
The no form of this command is not supported.
7210 SAS-E OS Quality of Service Guide
QoS Commands
Page 105