Service Management Tasks; Deleting Qos Policies - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Service Management Tasks

This section discusses the following service management tasks:
•
•
•

Deleting QoS Policies

A network queue policy is associated by default with all access uplink ports. You can replace the
default policy with a customer-configured policy, but you cannot entirely remove a QoS policy.
When you remove a QoS policy, the policy association reverts to the default network-queue policy
default.
To delete a user-created network queue policy, enter the following commands:
CLI Syntax: config>qos# no network-queue policy-name
Example
7210 SAS-E OS Quality of Service Guide
Deleting QoS Policies on page 119
Copying and Overwriting QoS Policies on page 120
Editing QoS Policies on page 122
:
config>qos# no network-queue nq1
Network Queue QoS Policies
Page 119