Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 187

Service Ingress MAC QoS Policy Match Commands
dot1p
Syntax dot1p dot1p-value [dot1p-mask]
no dot1p
Context config>qos>sap-ingress>mac-criteria>entry
Description The IEEE 802.1p value to be used as the match criterion.
Use the no form of this command to remove the dot1p value as the match criterion.
Default
None
Parameters
dot1p-value — Enter the IEEE 802.1p value in decimal.
dot1pmask — This 3-bit mask can be configured using the following formats:
dst-mac
Syntax dst-mac ieee-address [ieee-address-mask]
no dst-mac
Context config>qos>sap-ingress>mac-criteria>entry
Description Configures a destination MAC address or range to be used as a Service Ingress QoS policy match cri-
terion.
The no form of this command removes the destination mac address as the match criterion.
Default
none
7210 SAS-E OS Quality of Service Guide
Values
0 — 7
Format Style
Decimal
Hexadecimal
Binary
To select a range from 4 up to 7 specify p-value of 4 and a mask of 0b100 for value and mask.
Default
7 (decimal) (exact match)
Values
1 — 7 (decimal)
Format Syntax
D
0xH
0bBBB
QoS Commands
Example
4
0x4
0b100
Page 187