Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 219

Sample Output
*A:card-1>config>qos>access-egress>queue$ show qos access-egress
===============================================================================
Access Egress Policies
===============================================================================
Policy-Id
-------------------------------------------------------------------------------
1
10
30
35
===============================================================================
*A:card-1>config>qos>access-egress>queue$
*A:card-1>config>qos>access-egress>queue$ show qos access-egress 10 detail
===============================================================================
7210 SAS-E OS Quality of Service Guide
Label
CIR Admin
CIR Rule
PIR Admin
PIR Rule
CBS
Port-Id
Accounting
Scope
Template
Template
Template
Template
Description (Continued)
Specifies the administrative Committed Information Rate (CIR)
parameters for the queue. The CIR defines the rate at which the system
prioritizes the queue over other queues competing for the same band-
width.
min — The operational CIR for the queue will be equal to or greater
than the administrative rate specified using the rate command.
max — The operational CIR for the queue will be equal to or less than
the administrative rate specified using the rate command.
closest — The operational CIR for the queue will be the rate closest to
the rate specified using the rate command without exceeding the opera-
tional PIR.
Specifies the administrative Peak Information Rate (PIR) parameters
for the queue. The PIR defines the maximum rate that the queue can
transmit packets through the access port.
min — The operational PIR for the queue will be equal to or greater
than the administrative rate specified using the rate command.
max — The operational PIR for the queue will be equal to or less than
the administrative rate specified using the rate command.
closest — The operational PIR for the queue will be the rate closest to
the rate specified using the rate command.
def — Specifies that the CBS value reserved for the queue.
Specifies the physical port identifier that associates the access egress
QoS policy.
Specifies whether the accounting mode is packet-based or frame-
based.
Description
Default Access egress QoS policy.
QoS Commands
Page 219