Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 155

In the example above, assuming the policy is attached to a SAP in a VPLS service, compute the
classification entries per FC as:
FCnc = 1 + 1 + 1 + 0 = 3
Since this FC uses unicast, broadcast and multicast meter, three entries are required to identify
these traffic types explicitly. Unknown-unicast traffic type is classified using the same entry as
multicast traffic type and uses the same meter.
FCh1 = 1 + 1 + 1 + 1 = 4
Since this FC uses unicast, broadcast, multicast and unknown-unicast meter, four entries are
required to identify these traffic types explicitly.
FCef = 1 + 1 + 1 + 0 = 3
Since this FC uses unicast, broadcast and multicast meter, three entries are required to identify
these traffic types explicitly. Unknown-unicast traffic type is classified using the same entry as
multicast traffic type and uses the same meter.
FCh2 = 1 + 1 + 1 + 0 = 3
Since this FC uses unicast meter and broadcast meter, two entries are required to identify these
traffic types explicitly. Another entry is required to classify multicast and unknown-unicast traffic
type to the same FC and use the default meter #11.
FCl1 = 1 + 1 + 1 + 0 = 3
FCaf = 1 + 1 + 1 + 0 = 3
Since this FC uses unicast, broadcast and multicast meter, three entries are required to identify
these traffic types explicitly. Unknown-unicast traffic type is classified using the same entry as
multicast traffic type and uses the same meter.
FCl2 = 0 + 0 + 0 + 0 = 0
FCbe = 1 + 0 + 1 + 0 = 2
Using the above equation, the total classification entries used = 21 and the total meters used = 8
7210 SAS-E OS Quality of Service Guide
match
dot1p 2 7
exit
action fc "ef"
exit
entry 6 create
match
dot1p 7 7
exit
action fc "nc"
exit
exit
default-fc "be"
Service Egress/Ingress QoS Policies
Page 155