Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual page 156

Basic Configurations
If the same policy were to be used for a SAP in an Epipe service, then since all traffic is classified
to a unicast traffic type and since only unicast meters are used, the following are used:
FCnc = 1 + 0 + 0 + 0 = 1
FCh1 = 1 + 0 + 0 + 0 = 1
FCef = 1 + 0 + 0 + 0 = 1
FCh2 = 1 + 0 + 0 + 0 = 1
FCl1 = 1 + 0 + 0 + 0 = 1
FCaf = 1 + 0 + 0 + 0 = 1
FCl2 = 0 + 0 + 0 + 0 = 0
FCbe = 1 + 0 + 0 + 0 = 1
Using the above equation, the total classification entries used = 7 and the total meters used = 4.
As illustrated in this example, using the same policy for Epipe SAP can lead to inefficient use of
resources. Hence, it is recommended to create a different policy with the required number of
resources (i.e. with
Example 5
sap-ingress 10 create
Page 156
num-qos-classifiers
num-qos-classifiers 72
meter 1 create
exit
meter 3 create
exit
meter 4 multipoint create
exit
meter 11 multipoint create
exit
fc "af" create
meter 3
broadcast-meter 11
multicast-meter 4
exit
fc "be" create
meter 1
broadcast-meter 11
exit
ip-criteria
entry 1 create
match
dscp be
exit
action fc "af"
exit
entry 2 create
match
dscp cp1
exit
action fc "af"
exit
entry 3 create
match
dscp cp3
exit
= 16)
7210 SAS-E OS Quality of Service Guide