Service Ingress Qos Policy - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Basic Configurations

Service Ingress QoS Policy

To create an service ingress policy, define the following:
•
•
•
•
•
•
•
The following displays an service ingress policy configuration:
A:ALA-7>config>qos>sap-ingress# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-7>config>qos>sap-ingress#
Page 140
A policy ID value. The system will not dynamically assign a value.
Include a description. The description provides a brief overview of policy features.
Specify num-qos-classifiers parameter. By default, it is set to 16. It can be set to 16, 36 or
72. The number of meters allowed is equal to half the number of classifiers specified. The
maximum number of meters allowed is equal to 32.
Specify a default forwarding class for the policy. All packets received on an ingress SAP
using this ingress QoS policy will be classified to the default forwarding class.
Define forwarding class parameters.
→ Modify the unicast-meter default value to override the default unicast forwarding type
meter mapping for fc fc-name.
→ Modify the multicast-meter default value to override the default multicast
forwarding type meters mapping for fc fc-name.
→ Modify the unknown-meter default value to override the default unknown unicast
forwarding type meters mapping for fc fc-name.
→ Modify the broadcast-meter default value to override the default broadcast
forwarding type meters mapping for fc fc-name.
Specify IP or MAC criteria. You can define IP and MAC-based SAP ingress policies to
select the appropriate ingress meter and corresponding forwarding class for matched
traffic.
A SAP ingress policy is created with a template scope. The scope can be modified to
exclusive for a special one-time use policy. Otherwise, the template scope enables the
policy to be applied to multiple SAPs.
sap-ingress 100 create
description "Used on VPN sap"
7210 SAS-E OS Quality of Service Guide