Enabling Passage Of 59.94 (2X) Format; Switching The Input Reference Signal For Hd System - Sony MVS-8000X User Manual

Multi format switcher system with icp-x7000 integrated control panel.
Hide thumbs Also See for MVS-8000X:
Table of Contents

Advertisement

2
Press [Signal Format].
A pop-up window appears.
3
Press the button for the signal format to set.
Enabling Passage of 59.94 (2x)
Format Signals on an AUX Bus
When the signal format is 1080i/59.94 or 1080PsF/29.97,
passage of other format (59.94 (2x)) signals is enabled on
the AUX bus only.
You can output signals from a connector for which any of
the following is assigned.
Preset, Edit Preview, AUX1 to 48
Note
To enable this function requires BZS-8560X (for the
MVS-8000X) or BZS-7560X (for the MVS-7000X)
Switcher Upgrade Software.
1
In the Engineering Setup >System >Format menu
(7313), press [Signal Format], and select [1080i/
59.94] or [1080PsF/29.97].
2
Press [AUX Signal Format].
The AUX Signal Format menu (7313.5) appears.
3
Select the target data to set.
For each group, four outputs are selected together.
4
In the <AUX Signal Format> group, press
[59.94Hz(2x)].
To pass 59.94 (2x) signals through the AUX bus,
select [59.94Hz] or [29.97Hz].
5
Press [Execute].
6
Check the message, then select [Yes].
Notes
• Even if you press [Execute], the memory is not
initialized, so frame memory images and other data is
not lost.
• It is not possible to select a 59.94 (2x) format signal as
output to a sub screen in the multi viewer.
• If you assign 59.94 (2x) to any of the following outputs,
the corresponding format converter dedicated output is
disabled.
Output 1, Output 2, Output 25, Output 26
Switching the Input Reference
Signal for HD System
Note
The input reference signal for the MKS-7470X/7471X is
common to the switchers.
In the <Ref Input Format> group of the Engineering Setup
>System >Format menu (7313), select one of the
following.
Tri Sync: Tri-level sync for an HD system
BB (Black Burst): Black burst or sync
The following table shows the relationship between signal
format and the supported input reference signal frequency.
Signal format Input reference signal
Tri Sync BB
1080PsF/29.97
59.94
1080P/59.94
1080i/59.94
1080PsF/25
50
1080P/50
1080i/50
1080PsF/24
48
1080PsF/23.98 47.952
720P/59.94
59.94
720P/50
a) Interlock mode. Cannot be set on the control panel.
393
Black Burst 59.94
Sync 59.94
Black Burst 50
Sync 50
a)
Black Burst 59.94
Sync 59.94
Black Burst 59.94
Sync 59.94
Black Burst 50
Sync 50
a)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents