c UNDO button/DEL (delete) button
After recalling a register, press the [UNDO] button to
return to the state before the register was recalled.
Or press and hold the [DEL] button and press a register
button in the memory recall section to delete the data
registered in the button.
You can change the assignment of buttons in the Setup
menu.
For details, see "Setting Flexi Pad Control Block Button
Assignments" (page 411).
Note
The [UNDO] button and [DEL] button cannot be used in
effect operation mode or shotbox operation mode. The
[UNDO] button cannot be used in macro operation mode.
d Bank selection buttons
These select the target bank to control, and switches the
memory recall section to the register display for the
selected bank.
Key Control Block
The key control block is used to adjust and modify keys.
a Delegation buttons
b DME channel
selection buttons
c ON AIR indicators
d Setting buttons
e Function buttons
a Delegation buttons
These select the bank (M/E and PGM/PST) and keyer to
assign to the key control block.
You can change the assignment of bank selection buttons
in the Setup menu.
For details, see "Setting Flexi Pad Control Block Button
Assignments" (page 411).
Button name
BANK0 to BANK25
BANK SEL (bank
select)
Button name
M/E1 to M/E5, P/P
38
Description
(Assignment of [BANK3] to
[BANK25] is required.)
Switches the memory recall section
to the register display for the
selected bank.
Switches the memory recall section
to numeric keypad mode for
entering bank numbers.
Enter a bank number and press the
[ENTER] button to switch the
memory recall section to the
register display for the selected
bank.
f Display
g Adjustment
knobs
Description
Assigns M/E-1 to M/E-5 banks and
PGM/PST bank.