For subsequent operations, go to step 5 in "To set the
action when a DME wipe crop transition is executed"
(page 146).
To set the timing of transition completion
1
In the <Crop Mode> group of the M/E-1 >Key1
>Transition >DME Wipe Adjust menu (1116.3), press
[Crop], turning it on.
2
In the <Crop Mode> group, press [Remove From
Begin].
The Remove From Begin menu (1116.7) appears.
For subsequent operations, go to step 3 in "To set the
timing of transition completion" (page 146).
DME Wipe Snapshots
You can save a snapshot of a DME wipe pattern together
with all modifier and pattern limit settings in a dedicated
register for recall when required.
There are ten DME wipe snapshot registers on each
switcher bank.
Use the Flexi Pad control block in each switcher bank or
the menu to save and recall DME wipe snapshots.
DME Wipe Snapshot Operations
(Flexi Pad Control Block)
Pressing the [DME WIPE] button in the Flexi Pad control
block switches the memory recall section to DME wipe
snapshot operation mode for saving, recalling, and
deleting DME wipe snapshots.
DME wipe snapshot operations are the same as wipe
snapshot operations. However, a 4-digit pattern number is
entered to select DME wipe patterns.
For details about the method of operation, see "Wipe
Snapshot Operations (Flexi Pad Control Block)"
(page 136).
DME Wipe Snapshot Operations
(Menu)
You can save, recall, and delete DME wipe snapshots in
the DME Wipe >DME Wipe Snapshot menu on each
switcher bank.
DME wipe snapshot operations are the same as wipe
snapshot operations. However, a 4-digit pattern number is
entered to select DME wipe patterns.
For details about the method of operation, see "Wipe
Snapshot Operations (Menu)" (page 137).
149