Sony MVS-8000X User Manual page 471

5
Select the target item to set.
1. Maximum Open Delay: Maximum time required to
open a file
2. Maximum Cueup Delay: Maximum time required
to cue up a file
3. Play After Cueup Delay: Delay time from the cued-
up state to begin playback
4. Stop Delay: Delay time from issuing the Stop
command until actually stopping
5. Still Delay: Delay time from issuing the Still
command until actually stopping
6. Command Delay (Auto Mode): Delay time from
issuing the Auto Mode On/Off command until the
command takes effect
7. Command Delay (Out Preset): Delay time from
issuing the Out Preset command until the command
takes effect
8. Command Delay (Preview In Preset): Delay time
from issuing the Preview In Preset command until
the command takes effect
9. Internal Parameter (1): Reserved for future use (set
to 255)
10. .Internal Parameter (2): Reserved for future use
(set to 255)
11. .Internal Parameter (3): Reserved for future use
(set to 255)
12. .Internal Parameter (4): Reserved for future use
(set to 255)
6
Set the response speed or value.
No. Parameter Adjustment
2 Setting Response speed or value
7
Press [Set].
8
Repeat steps 5 to 7 as required to make the settings for
other items.
Configuring detailed settings for an
Extended VTR
1
In the <DCU Select> group of the Engineering Setup
>DCU >Serial Port Assign menu (7355), select the
target to set (DCU1 or DCU2).
2
Select the serial port connected to the target Extended
VTR to set.
3
Press [Port Setting].
The Extended VTR Setting menu (7355.5) appears.
The target serial port, slot number, device type, serial
port name, and PNL number appear at the top of the
status area. The response speed setting status appears
at the bottom of the status area.
4
Select the target item to set.
1. Maximum Open Delay: Maximum time required to
open a file
2. Maximum Cueup Delay: Maximum time required
to cue up a file
3. Play After Cueup Delay: Delay time from the cued-
up state to begin playback
4. Stop Delay: Delay time from issuing the Stop
command until actually stopping
5
Set the response speed.
No. Parameter Adjustment
2 Setting
6
Press [Set].
7
Repeat steps 4 to 6 as required to make the settings for
other items.
469
Response speed