Pattern Mix - Sony MVS-8000X User Manual

When a mosaic wipe is selected (pattern numbers 200
to 203, 206 to 213, 224 to 247, 250 to 257, 260 to 269)
No. Parameter Adjustment
1 H Tile No Number of tiles horizontally
2 V Tile No Number of tiles vertically
When a karaoke wipe is selected (pattern numbers 220
to 223)
No. Parameter Adjustment
Position of start tile
1 Start
2 Row No Number of rows of tiles
3 Phase Delay for next row
a) At –100.00 tiles appear from the top edge (or left edge) of the screen; at
+100.00 tiles appear from the bottom edge (or right edge) of the screen.
b) At –100.00 tiles in all rows appear simultaneously; at +100.00 tiles appear
in the next row after the tiles in the previous row are completely displayed.
When a random wipe is selected (pattern number 273)
No. Parameter Adjustment
1 H Size Tile width
2 V Size Tile height
3 Volatility Rate of tile generation
When a diamond dust wipe is selected (pattern number
274)
No. Parameter Adjustment
1 H Size Particle width
2 V Size Particle height
3 Flash Rate Rate of generation of particles
Note
When Flash Rate is set to 0.00, you cannot change the
pattern. In this state, adjusting H Size or V Size has no
effect on the pattern.

Pattern Mix

You can create a new pattern by combining two selected
patterns (main and sub).
Note
It is not possible to execute a pattern mix in an independent
key transition.
Types of pattern mix
The following four types of pattern mix can be selected.
Mix: The effect of the sub pattern is applied to the main
pattern, modifying the outline or nature of the main
pattern.
Positive NAM (+Nam): Creates a pattern with an outline
Negative NAM (Nam): Creates a pattern with an outline
a)
b)
Morphing: As the transition progresses, the pattern
Start value
126
comprising the sub pattern superimposed on the main
pattern.
of the overlapping portion of the main pattern and the
sub pattern.
Mix Positive NAM
changes. It morphs from the main pattern, through a
mix combination, to the sub pattern.
Main pattern at 100%
Sub pattern at 100%
Transition
(0.00 to 100.00)
1
3
5
1 Start of main pattern and sub pattern mix
2 Mix ends during transition, and sub pattern becomes 100%
3 Transition starts with main pattern at 100%
4 Ends with sub pattern at 100%
5 Mix begins during transition
6 Transition ends with main and sub patterns still in mix
combination
Negative NAM
2
4
6
End value