Resizer; Two-Dimensional Transforms And Rotation Of Keys - Sony MVS-8000X User Manual

Resizer

The resizer allows you to apply DME-like effects such as
image reduction/enlargement, movement, rotation, and
changes in aspect ratio, to the generated key portion.
The following functions are available.
• Two-dimensional transforms of keys (see page 117)
• Key rotation on the x- or y-axis (see page 123)
• Resizer interpolation settings (see page 119)
• Resizer crop/border settings (see page 119)
• Resizer effect settings (see page 121)
(wide key border, drop shadow, edge enhance, mosaic,
defocus, mask)
This section describes setting the resizer of key 1 on the M/
E-1 bank as an example.
Notes
• The image of the key manipulated by resizer has a one-
frame delay.
• Some effects of resizer are different from what you
would expect of DME effects.
• There are restrictions on the combined use of resizer
effects themselves and use with DME wipes. For details,
see (see page 121)
.
• You cannot apply DME effects to a key for which the
resizer function is enabled. When one of the three
functions – resizer, DME wipe and DME effects – is
enabled, the other two are disabled.
Two-Dimensional Transforms and
Rotation of Keys
Note
When the screen aspect ratio is 4:3 in HD format, reducing
an image using the resizer reduces the 16:9 image as-is
with the added image portions on the left and right sides.
Use the crop function as required to extract the 4:3 image.
Reducing, enlarging, rotating, and moving
keys (menu)
1
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
2
Set the following parameters.
Parameter group [1/2]
No. Parameter Adjustment
1 Location X Horizontal key movement
No. Parameter
2 Location Y
3 Size
Rotation X
a)
4
Rotation Y
b)
4
5 Perspective
a) When [X] is selected in the <Rotation> group of the Rotation menu.
b) When [Y] is selected in the <Rotation> group of the Rotation menu.
No. Parameter
1 Aspect X
2 Aspect Y
3 Aspect Ratio Change aspect ratio horizontally
Reducing, enlarging, rotating, and moving
keys (key control block)
For details about buttons and parameters on the key
control block, see "Key Operations (Key Control Block)"
(page 112).
Delegation buttons
Setting buttons
1
Press a delegation button to select the target keyer.
Press the [M/E1] button, turning it on, and press the
[KEY1] button, turning it on.
2
Press the [RSZR] button, turning it on.
3
Set the following parameters.
117
Parameter group [1/2]
Adjustment
Vertical key movement
Key reduction/enlargement
Horizontal key rotation
Vertical key rotation
Perspective
Parameter group [2/2]
Adjustment
Change aspect ratio horizontally
Change aspect ratio vertically
and vertically simultaneously
SHFT button
RSZR button
Key control block