Differences Between Multi Program 2 Mode And Standard Mode - Sony MVS-8000X User Manual

• "Sub Cut" and "Sub Auto Trans" on each switcher bank
are added to the selectable actions in the SIU (DCU
function) GPI input and switcher GPI link settings.
• The utility 3 bus is added to the buses on which a
switcher GPI link can be configured.
• "Main&Sub" and "Sub" are added to the macro event
configuration parameters and macro attachment settings.
• "Sub Program," "Sub Preset," and "Sub Trans PGM" on
each switcher bank are added to the link source bus for
cross-point button link settings.
• Snapshot attributes can be set independently for main
and sub.

Differences Between Multi Program 2 Mode and Standard Mode

The differences from operation in standard mode are as
follows.
Item
a)
Keys
Wipes Patterns
(background
)
Modifiers
Wipes (key)
DME Wipes Use
Patterns for 1 channel
Patterns for 2 channels
Patterns for 3 channels
Backgrounds
Modifiers
Transitions Key priority
Transition preview
Preset color mix
Snapshots Cross-point hold
Control from an editor
Operation setting for switcher GPI inputs and
outputs
a) Key 2 to key 8 are common on both main and sub.
• Menus for the sub bank are added to menus that can be
recalled by pressing a button twice.
• [MP2 Auto Correct] settings are available in the Effect
menu or Snapshot menu. For example, enabling this
determines whether the copy destination and copy
source data is the main bank or sub bank, and
automatically switches the data.
• The [SUB TRANS] button on the key control block is
enabled. This functions as the [TRANS] button for the
sub bank.
• You can display whether key 1 to key 8 are assigned to
the main bank or the sub bank in the display of the
transition control block.
Main
Key 1 to key 8 can be used
Same as standard mode
Same as standard mode
Same as wipes (background) for sub
Supported
• With a dedicated interface, each of main and sub can be used.
• With an SDI interface, only one of main and sub can be used.
Only one of main and sub can be used.
For each M/E, the number of DMEs that can be used is the same as in
standard mode.
Wipe edge fill matte (including
color mix and other settings in the
Matte Adjust menu)
Same as standard mode
Not supported
Not supported
Color matte or video signal
selected on the utility 2 bus
Utility 2 cannot be set
Same as standard mode
Same as standard mode
Notes
• Allow a transition to complete before carrying out main
and sub delegation switching.
202
Sub
Key 2 to key 8 only can be used
• Only standard patterns can be used
• Pattern mix is not possible
• Pairing, modulation, spring, spiral, and
split cannot be used
• Edge fill mattes are single color only
• Multi can be selected from four
patterns
Cannot be used (Can be used, with a
setting change)
Wipe edge fill matte (single color only)
Wipe border colors are single color only
Color matte only
• Utility 3 is added.
• BKGD A/B and Key1 cannot be set.
Not supported
Not supported