Sony MVS-8000X User Manual page 143

Relation to processed keys
• When using the DME for a processed key, selecting a
DME wipe automatically assigns an available DME for
use for DME wipes. If all DMEs are in use, then it is not
possible to select a DME wipe.
If a DME has been assigned in the Setup menu, that
setting takes precedence.
For details, see "Setting DME Channel Assignments"
(page 436).
• It is not possible to use a resizer DME wipe for a key
with processed key enabled.
Relation to resizer
• When a resizer is enabled, it is not possible to select a
DME wipe or resizer DME wipe.
• For the key 1 and key 2, key 3 and key 4, key 5 and key
6, or key 7 and key 8 combinations, if one key is used for
a dual resizer effect, the other key cannot be used for a
DME wipe or resizer DME wipe.
Resizer DME wipe restrictions
When the screen aspect ratio is 4:3 in HD format, reducing
an image using the resizer reduces the 16:9 image as-is
with the added image portions on the left and right sides.
Use the crop function as required to extract the 4:3 image.
Number of DME wipes that can be used
simultaneously on a single M/E bank
DME wipes can be used in nine places, including the eight
independent key transitions.
Notes
• When the signal format is 1080P, DME wipes can be
used in five places, including the four independent key
transitions.
• When the SDI interface is used to connect the DME,
DME effects (including DME wipes) can be used in only
one place for one M/E bank.
• When the dedicated interface is used to connect the
DME, the number of keys to which DME effects
(including DME wipes) can be applied simultaneously
for one M/E bank varies as follows depending on the
execution mode of the DME wipe pattern selected for the
background.
- On the MVS-8000X
Bank Key to
which DME
effects are
applied
All Keys 1 to 4 DME wipes
(excluding
M/E-4)
Keys 5 to 8 –
M/E-4 Keys 1 to 4 DME wipes
Keys 5 to 8 –
- On the MVS-7000X
Key to
DME wipe pattern
which DME for background
effects are
applied
Keys 1 to 4 DME wipes not
used
1-channel mode
2-channel or
3-channel mode
–
Keys 5 to 8
a) "0" when the system signal format is 1080P.
b) "1" when the system signal format is 1080P and the DME input/
output signal format is set to dual link mode.
c) "0" when the system signal format is 1080P and the DME input/
output signal format is set to dual link mode.
142
DME wipe Number of keys
pattern for to which DME
background effects can be
applied
simultaneously
2
not used
1-channel 1
mode
2-channel or 0
3-channel
mode
a)
2
b)
2
not used
1-channel
c)
1
mode
2-channel or 0
3-channel
mode
0
Number of keys to
which DME effects
can be applied
simultaneously
2
1
0
a)
2