Sony MVS-8000X User Manual page 40

For details, see "Two-Dimensional Transforms and
Rotation of Keys" (page 117).
SHFT (shift) button
This button switches the setting buttons between the
shifted and unshifted states.
e Function buttons
These buttons select the functions used for key operations.
Button name Description
OVERRIDE Selects a DME channel assigned to
another keyer from the currently
selected keyer (override function).
Press and hold the [OVERRIDE]
button and press the target DME
channel button to select it.
TRACE When a DME channel is assigned
to another keyer, this switches to
the keyer assigned with the DME
channel (trace function).
Press and hold the [TRACE] button
and press the target DME channel
button to switch keyers.
• Assigns a DME channel to the
MON (monitor)
monitor output.
Press and hold the [MON] button
and press the target DME
channel selection button to set it.
• You can check the monitor output
assignment status by pressing
the [MON] button by itself.
Lit amber:
DME channel that is assignable
to the monitor output.
Lit green:
DME channel currently assigned
to the monitor output.
PROC KEY Press the [PROC KEY], turning it
(processed key)
on amber, to enable selection of a
processed key signal as a re-entry
signal (PROC V, PROC K) on a
bank (M/E1 to M/E5, PGM/PST).
FM FEED (frame Pressing the [FM FEED] button,
memory feed) turning it on amber momentarily,
selects the processed key signal on
the frame memory source 1 and 2
buses. The [PROC KEY] button is
lit amber simultaneously.
Button name
SHOW KEY
AUTO DELEG (auto
delegation)
MORE
Displays the name of parameter items and the setting
value.
g Adjustment knobs
These buttons adjust the parameters of items selected using
the setting buttons.
40
Description
Displays the processed key source
signal on the specified output (edit
preview or image creation bank
preview) while the [SHOW KEY]
button is pressed (or for a preset
time) (show key function).
The show key function output and
preset time are configured in the
Setup menu.
For details, see "Setting Show Key"
(page 448).
Switches the key control block
delegation selection in conjunction
with buttons on the following control
blocks.
• Transition control block: [KEY1] to
[KEY8] buttons
• Cross-point Flexi Pad of the
cross-point control block: [1-ROW
KEY1] to [1-ROW KEY8] buttons,
[2-ROW KEY1] to [2-ROW KEY8]
buttons
• Memory recall section on the
Flexi Pad control block (key
operation mode): [KEY1] to
[KEY8] buttons
• When there are more than six
parameters, this button is lit
amber.
• Press the [MORE] button, turning
it on green, to display the 6th and
subsequent parameters.
f Display