Chapter 24 User Setup; Source Patching; Source Patching Operation Flow; Exporting A User Source Name File To A Removable Drive - Sony MVS-8000X User Manual

User Setup

Source Patching

Source patching is a function that automatically converts
recorded signal pairs into data that allows key snapshots,
snapshots, and keyframes to be used without modification
on other systems.
In the following description, there are two different
switcher systems referred to as switcher A and switcher B.

Source Patching Operation Flow

On switcher A, assign a name (user source name) to each
signal pair.
r
Export a user source name file to a removable drive.
r
On switcher B, import the user source names from the
removable drive.
r
Create a signal pair conversion correspondence table (patch
table).
r
On switcher B, recall the snapshot, key snapshot, or
keyframe file created using switcher A (signal pairs are
substituted according to the patch table).
Exporting a User Source Name File
to a Removable Drive
On switcher A, use the following procedure.
1
Open the User Setup >Source Patch >User Source
Name menu (7211).
2
In the list on the left, select the pair to set.
3
Press [Usr Src Name].
Chapter
4
Enter a name of up to 16 characters in the keyboard
window, and press [Enter].
5
Repeat steps 2 to 4 to set all of the necessary names.
6
Press [File >Exp Usr Src Name].
The File >Setup, Init, VKMem >Export User Source
Name menu (7116) appears.
7
Select the removable drive in the export destination
control device selection area, and press [t Export].
The user source name file is exported to the removable
drive.
To apply the pair settings in the patch table to the
menu
Press [Apply Patch Tbl].
Creating a Patch Table (Conversion
Table)
Load the removable drive created on switcher A onto
switcher B, and use the following procedure.
1
Open the User Setup >Source Patch >Patch Table
menu (7212).
2
Press [File >Imp Usr Src Name].
The File >Setup, Init, VKMem >Import User Source
Name menu (7117) appears.
3
Select the removable drive in the import source control
device selection area, and press [T Import].
The user source name file is imported from the
removable drive.
4
Press [Patch Table Assign].
The Patch Table Assign menu (7212.1) appears.
The switcher A user source names imported in step 3
are displayed in the list on the left. The video and key
477
24