Rings Settings; Broken Glass Settings; Flying Bar Settings - Sony MVS-8000X User Manual

No. Parameter Adjustment
2 Offset R
Center of modulation range along
radius
3 Size A Modulation level of ripple along
circumference
4 Offset A Center of modulation range along
circumference
To reverse the ripple range
When [Radial], [Both], or [Shape] is selected in the
<Mode> group, press [Range Rev R], turning it on.
When [Angular] or [Both] is selected in the <Mode>
group, press [Range Rev A], turning it on.
Other settings
You can configure [Lock], [Form], [Random], and [Range
Envelope].
The operation is the same as [Lock], [Form], [Random],
and [Range Envelope] in the Wave menu (4141.1).
For details, see "Wave Settings" (page 246).

Rings Settings

You can set the degree of transition, the degree of
randomness in the distance moved by each block, the
amount of movement, the width of the partitions, the
degree of randomness in partition width, the center point,
the starting angle, and other parameters.
To apply the Rings effect
1
Open the Non Linear >Rings menu (4141.7).
2
To make transition settings, press [Transition] and set
the following parameters.
No. Parameter Adjustment
1 Transition Degree of transition
2 Random
Degree of randomness in distance
moved by each block
3 Spiral Amount of movement toward
circumference accompanying
transition
3
To set the partition method, press [Partition] and set
the following parameters.
No. Parameter Adjustment
1 Width Width of partition
2 Random Degree of randomness in partition
width
3 Angle Starting angle of effect
4
To set the ring center position, press [Position] and set
the following parameters.
No. Parameter Adjustment
1 H
2 V
5
To partition into pixels, press [Pixel], turning it on,
and set the following parameters.
No. Parameter Adjustment
1 Density
2 Random

Broken Glass Settings

You can set the degree of transition, the degree of
randomness in the distance moved by each block, the
amount of movement, the width of the partitions, the
degree of randomness in partition width, the center point,
the starting angle, and other parameters.
You can also fix the direction in which shards scatter.
To apply the Broken Glass effect
Open the Non Linear >Broken Glass menu (4141.8).
The items and parameters displayed in the Broken Glass
menu, excluding [Direction], are the same as for the Rings
menu (see page 251).
To fix the direction in which shards scatter
Press [Direction], turning it on.

Flying Bar Settings

You can set the degree of transition, the degree of
randomness in the distance moved by each block, the
direction of movement, the width of the partitions, the
degree of randomness in partition width, the partition
angle, and other parameters.
To apply the Flying Bar effect
1
Open the Non Linear >Flying Bars menu (4141.9).
2
To make transition settings, press [Transition] and set
the following parameters.
No. Parameter Adjustment
1 Transition
251
Center point in horizontal direction
Center point in vertical direction
Degree to which image disappears
around periphery
Degree of jaggedness at block
edges
Degree of transition