Sony MVS-8000X User Manual page 123

2
Set the following parameters.
No. Parameter Adjustment
1 H Horizontal gain adjustment
2 V Vertical gain adjustment
3 All Horizontal and vertical adjustment
Setting a mosaic
1
In the M/E-1 >Key1 >Processed Key/Resizer
>Enhanced Effect menu (1115.4), press [Mosaic],
turning it on.
2
Set the following parameters.
No. Parameter Adjustment
1 Size Size of tiles
2 Aspect Aspect ratio of tiles
• Negative values expand
vertically.
• Positive values expand
horizontally.
3
In the <Mosaic/Defocus Mode> group, select the
signal to which to apply the mosaic effect.
Video/Key: Video signal and key signal
Video: Video signal only
Note
Enabling mosaic and selecting [Video/Key] in the
<Mosaic/Defocus Mode> group disables crop and
mask.
To make the mosaic like a relief pattern
1
Press [Relief], turning it on.
2
Set the following parameters.
No. Parameter Adjustment
3 Gain Relief depth of mosaic pieces
4 Angle Light source direction
Setting a defocus
1
In the M/E-1 >Key1 >Processed Key/Resizer
>Enhanced Effect menu (1115.4), press [Defocus],
turning it on.
2
In the <Mosaic/Defocus Mode> group, select the
signal to which to apply the defocus effect.
Video/Key: Video signal and key signal
Video: Video signal only
3
Set the parameters.
If using a dedicated DME interface, set in the same
way as the DME defocus.
For details, see "Defocus Settings" (page 239).
Note
Enabling defocus and selecting [Video/Key] in the
<Mosaic/Defocus Mode> group disables crop and
mask.
Setting a mask
1
In the M/E-1 >Key1 >Processed Key/Resizer
>Enhanced Effect menu (1115.4), press [Dual Rszr
Effect], turning it on.
2
Press [Mask], turning it on.
3
Press [Mask Menu].
The Mask menu (1115.5) appears.
4
In the <Mask Source> group, select [Box] or [Circle].
Box: Use a box pattern as the mask signal.
Circle: Use a circle pattern as the mask signal.
5
Set the following parameters.
No. Parameter Adjustment
1 H
2 V
3 Size
4 Soft
5 Aspect
6
To invert the mask source, press [Mask Invert],
turning it on.
7
To rotate a pattern, select the type of rotation in the
<Rotation> group, and set the following parameter.
When [Angle] is selected
No. Parameter Adjustment
1 Angle
122
Horizontal position
Vertical position
Size of mask
Softness of mask
Aspect ratio
Rotation angle of pattern
• A value of -1.00 corresponds to a
rotation of one turn
counterclockwise.
• A value of +1.00 corresponds to
a rotation of one turn clockwise.
• A value of 0.00 corresponds to
no rotation.