Circle Settings; Panorama Settings; Page Turn Settings - Sony MVS-8000X User Manual

No. Parameter Adjustment
1 H Lens center position in horizontal
direction
2 V Lens center position in vertical
direction

Circle Settings

You can set the size of the circle. You can also make the
axis of modulation vertical.
Applying the Circle effect
In the Non Linear >Circle menu (4141.17), set the
following parameter.
No. Parameter Adjustment
1 Radius Size of circle
To make the axis of modulation vertical
Press [Mod V], turning it on.
The axis of modulation when modulating to a circle
becomes vertical.

Panorama Settings

You can set the horizontal and vertical curvature, and the
curve center position.
Applying the Panorama effect
In the Non Linear >Panorama menu (4141.18), set the
following parameters.
No. Parameter Adjustment
1 Curve H Horizontal curvature
2 Curve V Vertical curvature
3 Position H Horizontal curve center position
4 Position V Vertical curve center position

Page Turn Settings

There are four modes: H&V, H, V, and Off. You can select
the turn position, the radius of the turned portion, the
amount and angle of turning, and the input video for the
front and back pages.
Applying the Page Turn effect
1
In the <Split Mode> group of the Non Linear >Page
Turn menu (4141.19), select the partition method.
H&V: The image turns as it is split from the center
into 4 parts: left, right, upper, lower.
H: The image turns as it is split from the center into 2
parts: left, right.
V: The image turns as it is split from the center into 2
parts: upper, lower.
When nothing is selected (Off): There are no splits
and the image turns from the edge.
2
Set the following parameters.
No. Parameter Adjustment
1 Radius
2 Offset
3 Angle
To set the input signal for the back page
1
In the <Back Video> group, select the signal input for
the back page.
Self: Use the same signal as the front page.
Flat: Use a single color.
Hue Rotation: Gradually vary the hue.
2nd Ch: Use the 2nd channel video signal.
To select 2nd Ch, you must select the DME for the
second channel beforehand.
For details, see "DME Effects for Keys" (page 109),
"DME Effects for Keys" (page 115), and "Combine
operation when using an SDI interface" (page 279).
2
Set the following parameters, according to the selected
input signal.
When [Flat] is selected
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
When [Hue Rotation] is selected
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Speed
Note
When using a page turn effect with one channel, the
following restrictions apply.
• In an MVE-8000A HD system, when the input is a title,
for example, parts of the back page other than the title
appear as black.
255
Radius of turn part
Amount of turn
Angle of turn
Saturation
Hue
Saturation
Speed at which the hue changes