Snapshot Status Display - Sony MVS-8000X User Manual

No. Parameter Adjustment
5 Temp Dur Temporary attribute dissolve duration
To add the auto transition attribute
Press [Auto Transition], turning it on.
To add the GPI output attribute
1
Press [GPI Output], turning it on.
2
Set the port number.
No. Parameter Adjustment
4 GPI Out GPI output port number
Port
To add the clip event attribute
Note
The following operating procedure can be used only for
frame memory assigned to a user region.
For details, see "Setting User Regions" (page 435).
1
Press [Clip Event].
The Clip Event menu (6321.2) appears.
2
In the <Frame Memory Select> group, press the target
button.
On the left of the status area, the region name and
content assigned to the selected frame memory (for
example, User1) are shown. On the right, the content
of the clip of the current frame memory is shown.
3
Press [Clip Event], turning it on.
The clip event attribute is added.
4
To select the clip in the "Current" field, press [Set].
5
To play the clip as soon as it is recalled, press [Auto
Play], turning it on.

Snapshot Status Display

The Snapshot >Snapshot >Attribute menu (6321) displays
the following information.
Region name: The selected region name appears in the
upper part of the list.
Register number
Register name
Lock status: When the register is locked (write-
protected), "L" is displayed.
Empty status: When the register is empty, "E" is
displayed.
Attribute settings: The attributes set for a register are
shown by the following character codes.
• When the cross-point hold attribute is added
Attributes set
Displayed
character codes
A, B Cross-point hold is set for the A or B
background bus.
1, 2, 3, 4, 5, 6, 7,
Cross-point hold is set for key bus 1, 2,
8
3, 4, 5, 6, 7 or 8.
U1, U2 Cross-point hold is set for the utility 1 or
utility 2 bus.
D2 Cross-point hold is set for video bus
selected for 2nd DME channel.
FvFkBvBk Cross-point hold is set for all of the DME
front video bus, DME front key bus, DME
back video bus, and DME back key bus.
Aux Cross-point hold is set for one of the
AUX buses.
Fm1, Fm2
Cross-point hold is set for one of the
frame memory 1 and 2 buses.
Ccr1, Ccr2 Cross-point hold is set for one of the
color corrector 1 and 2 buses.
RTR Cross-point hold is set for the Router
region.
• When the effect dissolve attribute is added
Displayed Attributes set
character codes
Duration value The effect dissolve attribute is set, with
the displayed duration.
• When the auto transition attribute is added
Attributes set
Displayed
character codes
T Auto transition is set.
• When the GPI output attribute is added
Attributes set
Displayed
character codes
Port number GPI output is set for the port of the
displayed number.
• When the clip event attribute is added
Displayed Attributes set
character codes
On Clip event is set.
338